如何成為工業測量與控制技術員
官方職業名稱：Industrial measurement and control technician
也稱為: Valve technician, Control valve technician, Control systems technician, IMC technician
安裝、測試和維修電錶、燃氣調壓器、温控器和安全閥等機械調節和控制裝置。
主要任務
- 安裝調節和控制裝置
- 維修調節和控制裝置
- 檢查電氣系統是否存在故障
- 調整裝置以確保讀數準確
- 測試裝置是否正常執行
- 在維護期間控制電源連接
- 將系統資料錄入電腦
- 與其他工作人員溝通
如何入行
成為工業測量與控制技術員需要資格和培訓。修讀這一職業所需的學習或培訓需要NCEA Level 2。必備條件：紐西蘭工業測量與控制（理論）證書（4級），或紐西蘭工業測量與控制（實踐）證書（4級）。其他要求：紐西蘭電氣工種證書（4級）或類似資格；紐西蘭工業測量與控制證書（5級）；電氣工作者註冊委員會（EWRB）頒發的學徒有限證書或執業執照；在EWRB註冊；駕駛執照。
入行途徑
- 證書和文憑課程: Entry certificates in electrical engineering. 紐西蘭高等教育委員會（TEC）將該職業與電氣與電子工程及技術方向的學習相關聯。資格：NZ Cert in Electrical Engineering Theory, NZ Cert in Electrical Pre-Trade。通常 1 年。這些資格的畢業生畢業一年後年收入中位數為 $48,000，五年後為 $63,000；畢業一年後有 70% 就業（TEC，依據紐西蘭統計局 IDI 數據）。; Intermediate certificates in industrial engineering. 紐西蘭高等教育委員會（TEC）將該職業與機械與工業工程及技術方向的學習相關聯。資格：NZ Cert in Industrial Measurement and Control (Theory)。通常 1.5 年。
薪酬
- 最常見薪酬：每年 $62,000 至 $85,000（中位數 $72,667），TEC 的税前估算。
- 較低：每年 $55,000 · 較高：每年 $92,000
- TEC 的薪酬數字只是估算。TEC 表示不得用於確定薪酬、薪酬談判或簽證申請。
相關職業
常見問題
如何成為工業測量與控制技術員？
成為工業測量與控制技術員需要資格和培訓。修讀這一職業所需的學習或培訓需要NCEA Level 2。必備條件：紐西蘭工業測量與控制（理論）證書（4級），或紐西蘭工業測量與控制（實踐）證書（4級）。其他要求：紐西蘭電氣工種證書（4級）或類似資格；紐西蘭工業測量與控制證書（5級）；電氣工作者註冊委員會（EWRB）頒發的學徒有限證書或執業執照；在EWRB註冊；駕駛執照。
工業測量與控制技術員在紐西蘭能賺多少錢？
紐西蘭高等教育委員會估算税前薪酬中位數為每年 $72,667。 最常見的薪酬為每年 $62,000 至 $85,000。
數據來源
- Tertiary Education Commission (Tahatu Career Navigator): Tahatu career ideas: descriptions, tasks, pay estimates, people employed, employment change 2018 to 2023, entry requirements, registration, interest scores（Site scrape 2026-10 (816 career ideas, sitemap lastmod 2026-10-01)），CC BY 4.0，取得於 2026年10月4日
職業名稱、描述和主要任務由 Peernovo 根據 Tahatū Career Navigator（紐西蘭高等教育委員會，CC BY 4.0）翻譯成中文。
This content is sourced from the Tertiary Education Commission through the Tahatū Career Navigator website (www.tahatu.govt.nz) and used under the CC BY 4.0 licence. All or some of the information has been modified by Peernovo. TEC has not approved, endorsed or tested these modifications. TEC will not be held accountable for any errors within this content.
Qualification information from NZQA, used under CC BY 3.0 NZ.
This work is based on/includes Stats NZ's data which are licensed by Stats NZ for reuse under the Creative Commons Attribution 4.0 International licence. Census data via Figure.NZ.
Includes information from O*NET OnLine by the U.S. Department of Labor, Employment and Training Administration (USDOL/ETA), used under the CC BY 4.0 license. O*NET is a trademark of USDOL/ETA. USDOL/ETA has not approved, endorsed, or tested these modifications.
Sources: Tertiary Education Commission, Tahatū Career Navigator (career ideas, pay estimates, entry requirements and study options, CC BY 4.0, modified by Peernovo); Stats NZ, 2023 Census (via Figure.NZ) and the National Occupation List (CC BY 4.0); NZQA qualification information (CC BY 3.0 NZ); O*NET interest scores (CC BY 4.0); ILO global generative AI exposure index (CC BY 4.0). Links between career ideas and ANZSCO groups, degree fields and broad job groups are Peernovo's.
These results are not official statistics. They have been created for research purposes from the Integrated Data Infrastructure (IDI), which is carefully managed by Stats NZ.
Graduate outcomes: these results are not official statistics. They have been created for research purposes from the Integrated Data Infrastructure (IDI), which is carefully managed by Stats NZ.
更新於 2026年10月4日